Modifier
Engine Oil
AT Fluid
Gear Oil
Brake Fluid
Filters
Brake Pads
Spark Plugs
Light Blubs
Wipers
Battery
 
Racing Brake Fluid 660 Factory Line

Lubricant for Transmission and differential with Mechanical LSD
TYPE 1: High friction type
TYPE 2: Low friction type

Application:

Brake fluids

Quality:

100% Synthetic

Product Range:

Car, Motorcycle

OEM Approvals :

FMVSS 116 DOT 4 ; SAE J1703


Very high dry boiling point of 325C and a wet boiling point of 204C. For all types of hydraulic brake and clutch actuators requiring non-silicone synthetic fluid. Specially designed to resist extreme temperature generated by racing carbon and ceramic brakes allowing a minimal air entrance for brake cooling.

Packaging: 0.5 L Tin Can
 

 
Racing Brake Fluid 660 Factory Line

Lubricant for Transmission and differential with Mechanical LSD
TYPE 1: High friction type
TYPE 2: Low friction type

Application:

Brake fluids

Quality:

100% Synthetic

Product Range:

Car, Motorcycle

OEM Approvals :

FMVSS 116 DOT 4 ; SAE J1703 ; ISO 4925


Very high performance brake fluid for hydraulic brakes and clutches. Dry boiling point : 312C / 593F

Packaging: 0.5 L Tin Can
 

 
FERODO DOT 4 - SYNTHETIC

The last things that most drivers think about are brake and clutch fluids. Many don't even know they're there.

But from the extremes of a freezing sub-zero morning to the searing temperatures that a braking system can reach on long downhill descents, or the stresses of multiple gear changes, we all expect our brakes and clutches to respond when we push with the pedal.

The FERODO product line includes a range of brake and clutch fluids which guarantees the highest quality and peak performance from hydraulic systems, and there are products to suit every application. Ferodo high quality brake and clutch fluids enable the service requirements of most car, van and motorcycles to be satisfied with just three grades.

FERODO DOT 4 - SYNTHETIC
A superior general purpose hydraulic fluid suitable for all motor vehicles and motorcycles made in the UK, Europe, Japan and the USA where a DOT 4 fluid is recommended.
  • High 230°C boiling point
  • Lower absorption rate than DOT 3 fluids
  • Protects metal from corrosion
  • Helps prevent system leaks
  DRY BOILING POINT WET BOILING POINT
  Legal
requirement
Ferodo Legal
requirement
Ferodo
DOT 4 Synthetic 230 °C 249 °C 155 °C 158 °C
DOT 5.1 Synthetic 260 °C 269 °C 180 °C 183 °C

Packaging: 500ml/1 Liter Bottle
 

 
FERODO DOT 5.1 HIGH PERFORMANCE

Ferodo DOT 5.1 is particularly suitable for vehicles equipped with ABS braking systems because of the short cycle time required.

Also a natural choice for high performance and racing cars where the exceptionally high boiling point gives maximum resistance to vapour lock. It avoids the spongy brake pedal, air solubility and water incompatibility associated with silicone based DOT 5 fluids.

FERODO DOT 5.1 brake and clutch fluid is suitable for motor vehicles and motorcycles made in the UK, Europe, Japan and the USA, that have been designed to use a synthetic fluid. It must not be used in some Citroen models or other vehicles which require a mineral based fluid such as FERODO LHM.
  • Extremely high 260 C boiling point, which is retained better than DOT 4
  • Ideal for ABS
  • Very low - 55 C freezing point
Ferodo offers two brake fluids formulated specifically for high performance and racing: Ferodo DOT 5.1 for high performance and Ferodo Formula for racing use.

These brake fluids contain polyalkylene glycol ether and other esters and should be handled by experienced mechanics only.

Anyone working with these brake fluids needs to adhere to the following health warning:
Keep out of reach of children. Avoid excessive skin contact. If swallowed, seek medical advice and show the container. In case of eye contact, flush with water for 10 minutes.

  DRY BOILING POINT WET BOILING POINT
  Legal
requirement
Ferodo Legal
requirement
Ferodo
DOT 4 Synthetic 230 °C 249 °C 155 °C 158 °C
DOT 5.1 Synthetic 260 °C 269 °C 180 °C 183 °C

Packaging: 500ml/1 Liter Bottle