|
|
|
|
|
Castrol MTF EP 80w-90
Suitable for use in applications where API GL-4 performance is required.
Features and Benefits
- Good thermal stability protects against deposit formation and oil thickening maintaining the life and performance of lubricant and transmission.
- Good anti-wear and load carrying characteristics to extend the life of components.
- Gives better performance over a wide temperature range then a 80W product.
- Provides greater wear protection and durability compared to Monograde fluids.
|
Specifications
Packaging: 1L Bottle
75W90 GL-5 Gear Oil
- Most popular Red Line gear oil, with thousands of applications for passenger cars, light trucks, and racing vehicles
- Contains additional friction modifiers for suitability with clutch-type limited slip differentials - for most LSDs, no additional friction modifiers are required
- This product is not designed for use in most manual transmissions or transaxles in passenger vehicles, since the extreme slipperiness may cause synchronizer mesh issues that lead to shifting problems
- Recommended for API GL-5, GL-6, MT-1, MIL-L-2105E, SAE J2360, and Chrysler spec MS-9763
ABOUT RED LINE GEAR OIL FOR DIFFERENTIALS
- Fully-synthetic formulas created from polyol ester base stocks, offer excellent lubrication under extreme conditions
- High viscosity-index (VI) to provide relatively constant viscosity and film thickness with varying temperature change
- Ester base stocks and friction modifiers provide additional slipperiness to lower operating temperatures by reducing the sliding friction in hypoid gears
- Superior shear stability and reduced oxidation compared to other synthetics and conventional gear oils
- Exceed API GL-5 specifications
- Engineered to provide the highest degree of protection and improvement of differential efficiency for better mileage, longer drain intervals, and less wear
TYPICAL PROPERTIES
API Service Class |
GL 5+ |
Viscosity Grade |
SAE 75W90 |
Vis @ 100°C, cSt |
16.4 |
Vis @ 40°C, cSt |
115 |
Viscosity Index |
155 |
Pour Point, °C |
-45 |
Pour Point, °F |
-49 |
Flash Point, °C |
227 |
Flash Point, °F |
440 |
Brookfield Viscosity, Poise |
1100 @-40°C |
Packaging: 1 Quart Bottle
|
GEAR FF-LSD TYPE 1 & 2 75W-90
Lubricant for Transmission and differential with Mechanical LSD
TYPE 1: High friction type
TYPE 2: Low friction type
Application: |
Transmission lubricants |
Quality: |
100% Synthetic |
Product Range: |
Car |
Viscosity: |
75W90 |
API Standards: |
API GL-5 |
|
TYPE OF USE
- Specially designed for FF (Front-engine/Front-drive) type transmission with mechanical LSD (Limited Slip Differential) system.
- Suitable for all transmission (synchronized or non-synchronized), 6-speed transmission, gearbox with differential, transfer gearbox and hypoid differentials with or without LSD.
- All types of cars: Circuit, Group A, Rally, Gymkhana, Tuned, 4WD
PERFORMANCE
STANDARD: API GL-5
- 100% synthetic lubricants with ester having excellent anti wear protection, extreme pressure performance and thermal stability at high temperature
Type 1: Ester based
Type 2: Complex ester based
- Stable frictional performance along with temperatures
- Included friction modifiers avoid noisy or dragging limited slip differential with appropriate torque transferring
- Smooth gear shifting
- Flexible option for users with different frictional characters
Type 1: High friction type
Type 2: Low friction type
RECOMMENDATIONS
Drain interval: according to manufacturers’ recommendations and tune to your own use.
PROPERTIES
|
|
TYPE 1 |
TYPE 2 |
Density at 15°C |
ASTM D1298 |
0.899 g/cm³ |
0.878 g/cm³ |
Viscosity at 100°C |
ASTM D445 |
16.8 mm²/s |
17.2 mm²/s |
Viscosity at 40°C |
ASTM D445 |
107 mm²/s |
104 mm²/s |
Viscosity index |
ASTM D2270 |
171 |
182 |
Pour point |
ASTM D97 |
-42.5 °C |
-48°C |
Flash point |
ASTM D92 |
206°C |
212°C |
Packaging: 1 Liter Bottle |
|